1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Content-Type ändern?

Dieses Thema im Forum "Internetradio- und Heimstudio-Software" wurde erstellt von DjRay, 01. September 2010.

Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. DjRay

    DjRay Benutzer

    Moin moin,

    habe heute entdeckt mein Stream sendet in Content Type: audio/aacp.
    Wie kann ich das beeinflussen das er in Content Type: audio/mpeg sendet?
    Wie kann dies einrichten?

    Danke
    DjRay
     
  2. Commander_Keen

    Commander_Keen Benutzer

  3. Inselkobi

    Inselkobi Benutzer

    AW: Content-Type ändern?

    Oder geht's dir um deinen Shoutcast-Server?
     
  4. niklasb

    niklasb Benutzer

    AW: Content-Type ändern?

    Ich glaub ja. Nicht AAC Encoder nehmen, sondern den MP3 Encoder.
     
  5. Inselkobi

    Inselkobi Benutzer

    AW: Content-Type ändern?

    Na, das ist ja nicht Sicher, denn sein Stream sendet ja ...
     
  6. niklasb

    niklasb Benutzer

    AW: Content-Type ändern?

    Hä, :D
     
  7. DjRay

    DjRay Benutzer

    AW: Content-Type ändern?

    http://85.214.38.202:8200/

    Hier zeigt es mir die Daten an und diese würde ich gerne ändern.

    Da sieht man den genauen Content Type
     
  8. caraoge

    caraoge Benutzer

    AW: Content-Type ändern?

    Ein SHOUTcast Server zeigt an welchen Inhalt dein Stream hat.
    Wenn da steht audio/aacp sendet der Moderator mit einem AAC+ Encoder.
    Steht da audio/mp3 sendet der Moderator mit einem MP3 Encoder.

    Das ist also keine Serversache sondern reine Client (In dem Fall der Moderator) Sache.
    Umstellen kann man das z.b. im SHOUTcast Plugin von Winamp oder in den einstellungen der Streamingsoftware des Moderators.
    Je nachdem was der Moderator zum Senden verwendet.

    Falls der Stream nicht von dir ist kannst du da gar nichts beeinflussen bzw verändern.
     
  9. Commander_Keen

    Commander_Keen Benutzer

    AW: Content-Type ändern?

    jo und da steht doch: audio/mpeg
     
  10. Inselkobi

    Inselkobi Benutzer

    AW: Content-Type ändern?

    Das steht da sogar noch immer ...
     
  11. DjRay

    DjRay Benutzer

    AW: Content-Type ändern?

    Das ist nur wenn meine Playlist läuft und kein Moderator on air ist.
    Deshalb dacht ich das es an der sc_trans oder so liegt :(
     
  12. Inselkobi

    Inselkobi Benutzer

    AW: Content-Type ändern?

    Na, weshalb fragst du das dann nicht gleich? :rolleyes:
     
  13. DjRay

    DjRay Benutzer

    AW: Content-Type ändern?

    Wie kann ich in der sc_trans bestimmen wie der Content Type ist? :)
    Da meine Playlist im Format audio/aacp spielt und ich aber audio/mpeg möchte :D
     
  14. Inselkobi

    Inselkobi Benutzer

    AW: Content-Type ändern?

    Das steht in der .conf deiner sc_trans.
    Diese solltest du von AAC auf MP3 umschreiben und die sc_trans neu starten.
    Deine Playlist spielt somit nicht im MP3-Format, sonst wuerde nicht audio/aacp waehrend des Betriebes der sc_trans zu lesen sein.
     
  15. caraoge

    caraoge Benutzer

    AW: Content-Type ändern?

    Wie wärs denn wenn du uns deine Konfiguration mal hier in einem CODE-Tag postest.
    Dann können wir dir sogar zeigen wo du was anpassen musst um im MP3-Format zu senden.
    Du kannst natürlich IP-Adressen und Kennwörter unkenntlich machen.
     
  16. DjRay

    DjRay Benutzer

    AW: Content-Type ändern?

    Hier mal die SC_Serv

    Code:
    ; SHOUTcast Distributed Network Audio Server configuration file
    ; Copyright (C) 1998-2004 Nullsoft, Inc.
    ; All Rights Reserved.
    ; Last modified Mar 17 2004
    
    ; If you want to manage multiple configurations, just copy
    ; this file to another name, and run sc_serv with that name
    ; such as:
    ; sc_serv.exe sc_leet.conf
    
    ; ***************************
    ; Required stuff
    ; ***************************
    
    ; MaxUser.  The maximum number of simultaneous listeners allowed.
    ; Compute a reasonable value for your available upstream bandwidth (i.e. if
    ; you have 256kbps upload DSL, and want to broadcast at 24kbps, you would
    ; choose 256kbps/24kbps=10 maximum listeners.)  Setting this value higher
    ; only wastes RAM and screws up your broadcast when more people connect
    ; than you can support.
    MaxUser=50
    
    ; Password.  While SHOUTcast never asks a listener for a password, a 
    ; password is required to broadcast through the server, and to perform
    ; administration via the web interface to this server.  This server should
    ; consist of only letters and numbers, and is the same server your broadcaster
    ; will need to enter in the SHOUTcast Source Plug-in for Winamp.  THIS VALUE
    ; CANNOT BE BLANK.
    Password=*******
    
    ; PortBase. This is the IP port number your server will run on.  The
    ; value, and the value + 1 must be available.  If you get a fatal error when
    ; the DNAS is setting up a socket on startup, make sure nothing else on the
    ; machine is running on the same port (telnet localhost portnumber -- if you
    ; get connection refused then you're clear to use that port).  Ports < 1024 
    ; may require root privledges on *nix machines.  The default port is 8000.
    PortBase=8200
    
    ; ***************************
    ; Optional Parameters
    ; ***************************
    
    ; ***************************
    ; Logging configuration
    ; ***************************
    
    ; LogFile: file to use for logging. Can be '/dev/null' or 'none'
    ; or empty to turn off logging. The default is ./sc_serv.log
    ; on *nix systems or sc_serv_dir\sc_serv.log on win32.
    ; Note: on win32 systems if no path is specified the location is
    ; in the same dir as the executable, on *nix systems it is in the
    ; current directory.
    LogFile=sc_serv.log
    
    ; RealTime displays a status line that is updated every second
    ; with the latest information on the current stream (*nix and win32 
    ; console systems only)
    RealTime=1
    
    ; ScreenLog controls whether logging is printed to the screen or not
    ; on *nix and win32 console systems. It is useful to disable this when 
    ; running servers in background without their own terminals. Default is 1
    ScreenLog=1
    
    ; ShowLastSongs specifies how many songs to list in the /played.html
    ; page.  The default is 10.  Acceptable entries are 1 to 20.
    ShowLastSongs=10
    
    ; TchLog decides whether or not the DNAS logfile should track yp 
    ; directory touches.  Adds and removes still appear regardless of
    ; this setting.
    ; Default is yes
    ; TchLog=yes
    
    ; WebLog decides whether or not hits to http:// on this DNAS will
    ; be logged.  Most people leave this off because the DSP plug-in
    ; uses http:// calls to update titles and get the listener count,
    ; which takes up a lot of log space eventually.  If you want to
    ; see people making hits on your admin.cgi or index pages, turn
    ; this back on.  Note that this setting does NOT affect XML stats
    ; counters for hits to http:// pages.
    ; Default is no.
    ; WebLog=Yes
    
    ; W3CEnable turns on W3C Logging.  W3C logs contain httpd-like accounts
    ; of every track played for every listener, including byte counts those listeners
    ; took.  This data can be parsed with tools like Analog and WebTrends, or given
    ; to third parties like Arbitron and Measurecast for their reporting systems.
    ; Default is Yes (enabled).
    W3CEnable=Yes
    
    ; W3CLog describes the name of the logfile for W3C logging.  Default logfile is
    ; sc_w3c.log, in the same directory wherever the DNAS gets started from.
    W3CLog=sc_w3c.log
    
    
    ; ***************************
    ; Network configuration
    ; ***************************
    
    ; SrcIP, the interface to listen for source connections on (or to make relay 
    ; connections on if relaying). Can and usually will be ANY or 127.0.0.1  
    ; (Making it 127.0.0.1 will keep other machines from being able to
    ; broadcast using your shoutcast server )
    SrcIP=ANY
    
    ; DestIP, IP to listen for clients on (and to contact yp.shoutcast.com)
    ; can and usually will be be ANY. If your machine has multiple IP addresses,
    ; set this to the one you want it to be accessed by.
    DestIP=ANY
    
    ; Yport, port to connect to yp.shoutcast.com on. For people behind caching 
    ; webproxies, change this to the alternate port (666 is what it might be, 
    ; check www.shoutcast.com if you have problems). Otherwise, leave this at 80.
    ; We're actively working on re-opening port 666, but as of release the only
    ; working port is port 80.
    Yport=80
    
    ; NameLookups.  Specify 1 to perform reverse DNS on connections.
    ; This option may increase the time it takes to connect to your
    ; server if your DNS server is slow.  Default is 0 (off). 
    NameLookups=0
    
    ; RelayPort and RelayServer specify that you want to be a relay server.
    ; Relay servers act as clients to another server, and rebroadcast.
    ; Set RelayPort to 0, RelayServer to empty, or just leave these commented
    ; out to disable relay mode.
    ; RelayPort=8000
    ; RelayServer=192.168.1.58
    
    ; ***************************
    ; Server configuration
    ; ***************************
    
    ; AdminPassword.  This password (if specified) changes the
    ; behavior of Password to be a broadcast-only password, and
    ; limits HTTP administration tasks to the password specified
    ; here.  The broadcaster, with the password above, can still
    ; log in and view connected users, but only the AdminPassword
    ; will grant the right to kick, ban, and specify reserve hosts.
    ; The default is undefined (Password allows control for both 
    ; source and admin)
    ; AdminPassword=**********
    
    ; AutoDumpUsers controls whether listeners are disconnected if the source
    ; stream disconnects. The default is 0.
    AutoDumpUsers=0
    
    ; AutoDumpSourceTime specifies how long, in seconds, the source stream is
    ; allowed to be idle before the server disconnects it. 0 will let the source
    ; stream idle indefinately before disconnecting. The default is 30.
    AutoDumpSourceTime=30
    
    ; ContentDir specifies the directory location on disk of where to stream
    ; on-demand content from.  Subdirectories are supported as of DNAS 1.8.2.
    ; Default is ./content, meaning a directory named content in the same directory
    ; as where sc_serv was invoked from.
    ; ContentDir=./content
    
    ; IntroFile can specify a mp3 file that will be streamed to listeners right
    ; when they connect before they hear the live stream.
    ; Note that the intro file MUST be the same samplerate/channels as the 
    ; live stream in order for this to work properly. Although bitrate CAN
    ; vary, you can use '%d' to specify the bitrate in the filename
    ; (i.e. C:\intro%d.mp3 would be C:\intro64.mp3 if you are casting at 64kbps).
    ; The default is no IntroFile
    ; IntroFile=c:\intro%d.mp3
    
    ; BackupFile can specify a mp3 file that will be streamed to listeners over
    ; and over again when the source stream disconnects. AutoDumpUsers must be
    ; 0 to use this feature. When the source stream reconnects, the listeners
    ; are rejoined into the live broadcast.
    ; Note that the backup file MUST be the same samplerate/channels as the 
    ; live stream in order for this to work properly. Although bitrate CAN
    ; vary, you can use '%d' to specify the bitrate in the filename
    ; (i.e. C:\backup%d.mp3 would be C:\backup32.mp3 if you are casting at 32kbps).
    ; The default is no BackupFile
    ; BackupFile=C:\intro%d.mp3
    
    ; TitleFormat specifies a format string for what title is sent to the listener.
    ; For example, a string of 'Justin Radio' forces the title 'Justin Radio' even
    ; when the source changes the title. You can use up to one '%s' in the string
    ; which lets you contain the title from the source. For example, if your 
    ; TitleFormat is 'Justin Radio: %s', and the source plug-in's title is 
    ; 'Billy plays the blues', then the net title is 
    ; 'Justin Radio: Billy plays the blues'. Note: only works on non-relay servers.
    ; The default is no format string. 
    ; TitleFormat=Justin Radio: %s
    
    ; URLFormat specifies a format string for what url is sent to the listener.
    ; Behaves like TitleFormat (see above).
    ; The default is no format string.
    ; URLFormat=http://www.server.com/redirect.cgi?url=%s
    
    ; PublicServer can be always, never, or default (the default, heh)
    ; Any setting other than default will override the public status
    ; of the source plug-in or of a SHOUTcast server that is being relayed.
    PublicServer=default
    
    ; AllowRelay determines whether or not other SHOUTcast servers will be
    ; permitted to relay this server.  The default is Yes.
    AllowRelay=Yes
    
    ; AllowPublicRelay, when set to No, will tell any relaying servers not
    ; to list the server in the SHOUTcast directory (non-public), provided
    ; the relaying server's Public flag is set to default.  The default is
    ; Yes.
    AllowPublicRelay=Yes
    
    ; MetaInterval specifies how often, in bytes, metadata sent.
    ; You should really leave this at the default of 8192, but the option is 
    ; provided anyway.
    MetaInterval=32768
    
    ; *****************************
    ; Access Control
    ; *****************************
    
    ; ListenerTimer is a value in minutes of maximum permitted time for
    ; a connected listener.  If someone is connected for longer than this
    ; amount of time, in minutes, they are disconnected.  When undefined,
    ; there is no limit defined.  Default is undefined.
    ; ListenerTimer=600
    
    ; BanFile is the text file sc_serv reads and writes to/from
    ; for the list of clients prohibited to connect to this
    ; server.  It's automatically generated via the web
    ; interface.
    ; BanFile=sc_serv.ban
    
    ; RipFile is the text file sc_serv reads and writes to/from
    ; for the list of client IPs which are *ALWAYS* permitted
    ; to connect to this server (useful for relay servers).
    ; This file is automatically generated via the web
    ; interface.  Note that if your server is FULL, and someone
    ; from a Reserved IP connects, the DNAS will force the person
    ; listening for the longest time off to make room for the new
    ; connection.
    ; RipFile=sc_serv.rip
    
    ; RIPOnly, when set to Yes, will only allow IP addresses listed in the Reserved
    ; IP list to connect and relay.  All other connections for listening will be denied.
    ; This is really only useful for servers whose sole purpose is to provide the
    ; primary feed to all public relays.  Setting this value to Yes also forces the
    ; server into Private mode, since listing this server in the directory would
    ; be pointless.  Default is No.
    ; RIPOnly=No
    
    ; *****************************
    ; Extended Logging 
    ; *****************************
    
    ; The old features previously at this location, HistoryLog and CurrentLog, are
    ; no longer used and succeded by W3C Logging and XML, respectively.
    
    ; ***************************
    ; Mass Configuration
    ; ***************************
    
    ; Unique: assigns a variable name for use in any config item which points to a
    ; file.  Useful for servers running lots of SHOUTcast servers that have similar
    ; configuration parameters, excepting logfile names, banfile names, etc.  Any
    ; parameter that takes a pathname can include the character $, which will
    ; substitute $ for the variable assigned here.  Keep in mind that the unique
    ; variable can only be used after it is defined, so don't try to use a unique
    ; variable substitution in a path before you define it.  For example, you 
    ; could set:
    ; Unique=my_server
    ; and then define Log=/usr/local/shoutcast/$.log in an included configuration 
    ; file.  Default is Unique=$, so that by default any file with $ in the name 
    ; won't substitute anything at all.
    
    ; Include: instructs the sc_serv to read from the named configuration file,
    ; *at the point of insertion of the Include statement*, and process as though
    ; the included file was part of itself.  Note that all configuration parameters
    ; in the DNAS config file are processed first to last, so if an item is defined
    ; twice in a configuration, the last item to process will be the one that takes
    ; effect.  For this reason, it's usually a good idea to use the Includes first
    ; in a config file.
    ; example:
    ; Include=/usr/local/shoutcast/common.conf
    ; Default is not applicable.
    
    ; *****************************
    ; Tweaks
    ; *****************************
    ;
    ; DON'T MESS WITH THIS STUFF UNLESS YOU REALLY KNOW WHAT YOU'RE DOING.
    ; DON'T COMPLAIN TO US IF YOU MESS WITH IT AND THINGS BREAK.
    ; HAVE A NICE DAY.
    
    ; CpuCount is used to explicitly limit the DNAS to dominating a finite
    ; amount of processors in multiprocessor systems.  By default, 
    ; SHOUTcast creates one thread for every processor it detects in the
    ; host system, and assigns listeners equally across all the threads.
    ; In the event SHOUTcast doesn't correctly determine the number of
    ; CPUs in your host, or if you for whatever reason want to force
    ; the DNAS to not use other processors, you can say so here.
    ; Default behavior is to use as many processors as the DNAS detects on
    ; your system.
    ; CpuCount=1
    
    ; Sleep defines the granularity of the client threads for sending data.
    ; DNAS 1.7.0, per client thread, will send up to 1,024 bytes of data
    ; per socket (or less depending on the window available), and then
    ; sleep for the provided duration before repeating the whole process.
    ; Note that making this value smaller will vastly increase CPU usage on 
    ; your machine.  Increasing reduces CPU, but increasing this value too far 
    ; will cause skips.  The value which seems most optimal for 128kbps 
    ; streaming is 833 (833 microseconds per client poll) on our test labs.
    ; We wouldn't recommend setting it any lower than 100, or any higher than 
    ; 1,024.  If you have a slower machine, set this number lower to fix
    ; skips.
    ; Default value is 833.
    ; Sleep=833
    
    ; CleanXML strips some whitespace and linefeeds from XML output which
    ; confuses some (poorly written) XML parsers.  If you get XML rendering errors,
    ; try turning this on.  Default is No (off).
    ; CleanXML=No
    ;
    ; TAG RULES

    Und hier die sc_trans:

    Code:
    Ast
    Radio-Streetstation
    ; Sample sc_trans/0.35-j config file
    ; j.frankel 12/05/00
    ; t.pepper 10/31/00
    ; (relays not supported, yo)
    ;
    ; sc_trans operates in one of two modes, either reading mp3s off disk, decoding,
    ; re-encoding, and then broadcasting them, or relaying from a shoutcast server,
    ; transcoding to a lower bitrate, and broadcasting to a new server.
    
    ; sc_trans accepts the following signals:
    ; HUP - flush logfiles (close and reopen) -- will make console logging stop
    ; WINCH - jump to next song
    ; USR1 - reload playlist off disk (will not interrupt current playing stream)
    ; USR2 - toggle shuffle on/off
    ; TERM - normal sc_trans shutdown (clean)
    
    ; PlaylistFile (required EVEN IF RELAYING) - playlist file (to create, use
    ; find /path/to/mp3/directory -type f -name "*.mp3" > playlist_filename.lst
    PlaylistFile=example.lst
    
    ; ServerIP/ServerPort are the target server to send to
    ServerIP=85.214.38.202
    ServerPort=8200
    
    ; Password is the password on the sc_serv you're sending to.
    Password=********
    
    ; StreamTitle/URL/Genre define the data that appears on the directory and in the
    ; stream info.
    StreamTitle=Radio-Streetstation
    StreamURL=http://www.radio-streetstation.net
    Genre=Pop
    
    ; Logfile optionally denotes a text file to log sc_trans to.  a kill -HUP
    ; will force a close and re-open of this file (but will also cease logging to
    ; the console)
    LogFile=sc_trans.log
    
    ; Shuffle the playlist
    Shuffle=1
    
    ; Bitrate/SampleRate/Channels recommended values:
    ; 8kbps 8000/11025/1
    ; 16kbps 16000/11025/1
    ; 24kbps 24000/22050/1
    ; 32kbps 32000/22050/1
    ; 64kbps mono 64000/44100/1
    ; 64kbps stereo 64000/22050/2
    ; 96kbps stereo 96000/44100/2
    ; 128kbps stereo 128000/44100/2
    Bitrate=128000
    SampleRate=44100
    Channels=2
    InputSamplerate=44100
    InputChannels=2
    ; Quality is from 1-10. 1 is best, 10 is fastest.
    Quality=1
    
    
    ; Mode=0 for none, 1 for 100/100->100/0, 2 for 0/100->100/0
    CrossfadeMode=1
    ; Length is ms.
    CrossfadeLength=8000
    
    UseID3=0
    
    ; Public determines whether or not this station will show up in the directory
    Public=1
    
    ; Put stuff here for user interaction (AOL IM, ICQ, IRC)
    AIM=
    ICQ=
    IRC=
    
    Danke fürs durchsehen
    DjRay
     
  17. DjRay

    DjRay Benutzer

    AW: Content-Type ändern?

    Kann mir keiner helfen?
     
  18. caraoge

    caraoge Benutzer

    AW: Content-Type ändern?

    Welches Format haben denn die Lieder die in der Playlist sind?
     
  19. DjRay

    DjRay Benutzer

    AW: Content-Type ändern?

    natürlich .mp3 :D
    Alle Tracks
     
  20. DjRay

    DjRay Benutzer

    AW: Content-Type ändern?

    Habe im Forum gelesen man muss eine Lizenz für Mp3 erwerben ist das denn wirklich notwendig?
    Wenn ja habe 2 Streams am laufen gleiche IP nur verschiedene Ports!
    Brauche ich dann 2 Lizenzen?

    Danke DjRay
     
  21. Inselkobi

    Inselkobi Benutzer

    AW: Content-Type ändern?

    [boese]
    Nein, ein Webradio kostet wirklich auch noch Geld? - Frechheit! - Die sollten froh sein, dass man schon seine Zeit, seinen Strom, sein Wissen und sein absolut perfektes Koennen einsetzt um ueberhaupt etwas zu bieten!
    [/boese]
     
  22. DjRay

    DjRay Benutzer

    AW: Content-Type ändern?

    Em was soll ich jetzt mit der bemerkung anfangen?
    Und das es Geld kostet ist mir auch klar Gema GVL ect.
    Also was soll das? Ich fragte einfach nur ob die MP3 Lizenz für Shoutcast Server
    wirklich notwendig ist oder ich da was falsch verstanden habe.
    Weil wenn ja dann ist mir klar warum mein Stream nur ACC sendet.
     
  23. Inselkobi

    Inselkobi Benutzer

    AW: Content-Type ändern?

    ACC akut? Hustenloeser? Hast du - oder hat dein Shoutcast-Server Husten?
    Was du meinst ist ist wohl AAC, bzw. AAC+. ;)

    Ein Stream 'sendet' noch immer nicht. Du meinst deine sc_trans, also den Streamtranscoder. Denn der sc_serv, also der Shoutcast-Server benoetigt ebenfalls keine Lizensierung - wie du bemerkt haben solltest, denn einige deiner Moderatoren koennen ja in MP3 streamen. Ergo - logisch gedacht - kann die Lizenz nur fuer den Streamtranscoder benoetigt werden. - Oder?
     
  24. DjRay

    DjRay Benutzer

    AW: Content-Type ändern?

    Ja okay logisch aber brauch man den für den Streamtranscoder denn wirklich diese Lizenz für MP3 oder kann man dies auch anders lösen?
    Mein Problem ist im großen und ganzen einfach das mein Streamtranscoder :D aac sendet und zb die Media Player Scripte einfach dies nicht abspielen.
    Und nur die Player gehen wenn einer On Air ist. Deshalb würde ich das ganze in Mp3 ausgeben und mein Streamtranscoder statt AAC zu MPEG bzw MP3 machen
     
  25. Commander_Keen

    Commander_Keen Benutzer

    AW: Content-Type ändern?

    Du wirst doch wohl $5 übrig haben um dir den MP3-Stream zu lizensieren!?
     

Status des Themas:
Es sind keine weiteren Antworten möglich.

Diese Seite empfehlen